SG-6T Pre-Fasten shear wrench
- Torque Controlled
- For tension control bolt pre-fasten.
- Standard socket sets including inner and outer sockets for shear wrenches.
- Socket sets vary in appearance and size based on model of shear wrench
M20(3/4"), M22(7/8"), M24(1")
specialist now?
Description
No | Item | Data |
1 | Power | Electricity |
2 | For | Tension control bolt |
3 | Power consumption W | 1200 |
4 | Torque | 300-600N.m 221-443ft.lbs |
5 | Ro Speed r/min | 16 |
6 | Applicate for | M20,M22,M24 3/4″,7/8″,1″ |
7 | Type | Non-impact |
8 | Outer Diameter (D) mm | 77 |
9 | Weight kg | 5.6 |

What’s else of this type? Overview
Model | Power consumption W | Currency A | Voltage V | Frequency HZ | Ro Speed r/min | Max Torque | Applicate | Outer Diameter (D) mm | Weight kg |
SG-6T | 1200 | 5 | 220 | 50-60 | 16 | 300-600N.m 221-443ft.lbs | M20,M22,M24 3/4″,7/8″,1″ | 77 | 5.6 |
SG-10T | 1350 | 5 | 220 | 50-60 | 6.5 | 600-1000N.m 443-738ft.lbs | M27,M30 1-1/8″,1-1/4″ | 85 | 6.5 |
More about Tension Control Bolt



FAQs
High Strength Hexagon bolt installation should be divided to Pre-fasten and final fasten. Pre fasten torque is +-50% of final fasten.for example M20 10.9s 170N.m Pre-fasten, according to JGJ82 standard.
Tension control bolt installation should be divided to pre-fasten and final fasten.Torque request 0.065*Pc*d.Use HiTens shear wrench to install TC bolt until shear off spline.
If not for bolt preload, all of the burden would be shifted to the bolt to hold the weight. The introduction of the preload ensures that less number of bolts are needed, with the support plates playing an important role in holding the load.
TC bolt need Hitens Pre-fasten Shear wrench
High strength hex bolt need HiTens Electric torque control wrench Pre-fasten.
Normally 1-2 days.
For 10+ sets need to check with us.
T/T ,Western Union, LC
Yes how long do you need,we will special make for you.
Yes.
Wrench,socket,user manual.
Shear wrench,electric torque control wrench and accessories.